The Overview to retrofit Bi Xenon Projector Housing in CCAG CS75

In the majority of time, lots of automobile tuning Enthusiasts upgrade their manufacturing facility halogen front lights right into HID bulb. However it is a little difficulty. Mounting a HID bulb, it ought to be suit with the projector and also the ballast. While some individuals will think it is a frustrating. They will choose to upgrade the front lights housing. One of our clients do that, He drive his CS75 for concerning 10,000 kilometers.

1. The new housing DRL, Hella bi xenon projector for low beam, Iwasaki D2H HID light bulb, BMC reflector for high beam of light, H1 halogen bulb as well as Aozoom ballast.
2. He mosted likely to our shop to complete the tuning.

The mount steps were fairly easy, it did not require great deals of difficult work to fit the headlight projector kit and also test light beam pattern. The whole devices were all mounted in the housing. Just take apart the OEM housing and also placed the brand-new one in it.

Open up the bumper and also remove the housing. After completing the setup, the light test is essential. It did not mount a projector and also light bulb, check if the lights are working properly. All points are done, mount the bumper into the cars and truck as well as adjust the light beam pattern once more.

An automobile, specifically in the evening driving, needs a risk-free lights guarantee, certainly, the elevation and also illumination of the light should be within in a reasonable range. Do not adjust the elevation of low beam too high, although you are driving with low beam, the SUV design is expensive. The low beam will certainly be emit farther, that would certainly influence the safety and security of opposite driving.